Where to recycle plastic bottle tops in Australia

Where to recycle bottle tops in Australia

Plastic bottle tops - these cheeky little fellas sure can cause some confusion when it comes to how they can be disposed of responsibly. So much so, that our inbox is frequently inundated by questions on the subject on the daily! Below, we fill you in on some common questions and misconceptions to get you well on your way to sustainable disposable of this (extremely useful and valuable!) resource.

Where to recycled plastic bottle caps in Australia

Why bottle caps can't be recycled through your home recycling bin

In many Australian councils, plastic bottle tops must be separated from bottles before being placed in the recycling bin. Bottle tops are too small to be accurately sorted at most Materials Recycling Facilities (MRFs), and if placed loose within your kerbside recycling bin, often end up contaminating the recycling mix or jamming the sorting machinery. Unfortunately, this has meant that up until recently, plastic bottle caps have had to be disposed of alongside general household waste, keeping the 'non-recyclable' material out of the recyclable waste stream.

Recyclers that accept plastic bottle lids in Australia

Enter the Envision Hands program

In 2019, community charity initiative Envision Hands was created with the vision to turn discarded plastic bottle caps into interim mobility aids (prosthetic limbs) for children.

The first phase of the project (bottle cap collection) was hugely successful, with the collection of over 5,000,000 bottle caps in Victoria and another 10,000,000 collected interstate. 

However, towards the end of 2019, Envision paused donations, before putting out a call out-to stop the flow of lids entirely, and released the following statement to advise of complications in production and quality assurance. "Despite our best efforts, the children’s mobility aids that we have produced from recycled bottle caps have not met our internal quality standards. Regrettably, Phase Two of the project will cease, and we will no longer seek support for the Envision Hands project.

Recycling facilities for plastic bottle lids in Australia | Precious Plastic Melbourne

A grassroots micro-recycling movement provides a circular solution

With Aussies around the country diligently collecting lids in the thousands, not long after we established Precious Plastic Melbourne we were contacted by Envision, and met with their founder Sean Teer to arrange the handover of around 300,000 lids, and to redirect the never-ending flow of incoming plastic waste to our micro-recycling workshop in the eastern suburbs of Melbourne.

Ever since, we've been able to provide a sustainable solution for Lids4Kids, diverting a valuable resource from landfill, and maintaining the high value of the waste stream through repurposing the discarded lids into a range of useful products, such as plastic bricks, gardening tools, jenga blocks and more.

We have an incredible working partnership with Lids4Kids, and were honoured to produce a range of Zephyr Bros. recycling machinery and product moulds for the Lids4Kids team for use at their headquarters in Canberra. 

How & where to donate your plastic lids

Here at PPM, we do not accept plastic directly from the public. Lids can be donated for recycling via the following channels:

    1. Lids4Kids. Lids4Kids coordinate plastic collection through local schools, businesses and individuals. You can find your local Lids4Kids group and closest drop-off point via the Lids4Kids Facebook page or website. (If you're having trouble finding your closest collection point, you need to contact Lids4Kids rather than PPM.)
    2. Your local micro-recycler. Check out our Impact Map to find micro-recyclers in your area. You'll need to contact them directly to find out what materials they accept at their particular facility.  

Which plastic lids can be accepted by Lids4Kids for recycling? 

This may depend on your location, so your best bet is to touch base with your local Lids4Kids branch to confirm what can and can't be accepted.

At PPM specifically, there is no limit to the volume of lids we're able to process at our current capacity. We've attached our general guide below, detailing which lids we work with and recycling requirements.

PPM Lid Recycling Guide:

  1. Lids labelled 2 or 4 only (if in doubt, keep it out!)
  2. Lids must be 100% clean (even a cheeky spec of dirt can contaminate a batch)
  3. Size no bigger than a milk lid
  4. Any inserts removed (and if not removable, remove from the batch)
Plastic lid recycling guide

Why micro-recycling? 

Not only are we capable of recycling this 'tricky' waste stream, we're also committed to ensuring this highly versatile resource is upcycled into high quality items, that are also recyclable at end-of-life. You won't find any low grade, single-use, non-recyclable products at PPM - we not only believe that maintaining the integrity of this material is key to a successful circular economy for plastics, but that it also honours the time, effort, commitment and care that was put into the collection of all of these these little lids.

Organisations turning plastic bottle caps into new products in Australia

What can be done with plastic lids that can't be recycled? 

What to do with those cheeky number 5's, unnumbered lids, or lids with adhered inserts on the inside?! Those leftover odd n' bods can still be reused through art and craft - try your local 'Reverse Garbage' organisation, schools or kindergartens.

Keen to do some lid crafting yourself? Here's some wonderful inspo to get you going!

Image source: Pinterest


For lid related queries or donations, you can find your local Lids4Kids group and closest drop-off point via the Lids4Kids Facebook page or website. (If you're having trouble finding your closest collection point, you need to contact Lids4Kids rather than PPM.) Alternatively, head to our Impact Map to find a micr-recycler near you!

Back to blog

52 comments

If you could supply us with a collection point here in Hobart Tasmania we can organise collection of tops through our Lions club International network. Cheers- Ken

Ken Hughes

I suggest we collect them and drop ‘em back to the manufactures. Maybe then they’ll endeavour to find an alternative & recyclable solution – or would they try to keep a lid on it?

Greg A

Hi,
D o you have any contacts in Tasmania for recycling lids? Since Lids for Kids have stopped we have so many people who want to do the right thing and help recycle them. Also can code 2 go in the recycle bins? Thanks for your help 👍

V McNally

We are a business in Footscray can you please let me know the closest recycling plant

Jenni James

I’ve been collecting milk bottle lids since before Covid. There’s only 2 of us but we’ve collected a big bag full but don’t know where the best place is to take them. I live in Wodonga Victoria but could leave them in Melbourne if there’s no where closer.

Jenny Copland

Leave a comment

Please note, comments need to be approved before they are published.